Paint Your Own Tank Top With Pebeo Setacolor Fabric Paint

Here's what you will need to paint this Tank Top:

• Black Tank Top (or T Shirt if your prefer). Mine is 95% cotton, 5% elastane. Look for a smooth rather than a ribbed fabric.
• Pebeo Setacolor Opaque fabric paint in "Shimmer Silver"
• Pebeo Setacolor Thickener
• Pebeo Setacolor Opaque fabric paint in "Cornflower"
• Pebeo SetaSkrib Markers in Blue and Black
• Paint brushes, one flat, one small round, I used Princeton brushes.
• Heavy paper to place inside your Tank Top so paint doesn't run through to back
• Removable tape to secure your masks to your Tank Top
• Lint Roller (or other tool to remove lint)

To make a moon stencil:

• A4 size craft foam sheet (Or even heavy cardboard would be ok)
• Plate or circle template
• Craft knife and mat

To make Moon Gazer mask:

• Print up template provided (computer and printer required)
• Piece of heavy paper (185 - 300 gsm would be OK)
• Heavy Gloss Gel
• Old paint brush for Gel
• Scissors

Here's what to do:

• Firstly wash your top in a detergent that does not contain fabric softeners.

Make a circle stencil for your moon.

• To make your moon stencil, you need to cut out a circle shape. I used a thin piece of craft foam, and a bread n butter plate. Place on a cutting mat, and cut around the plate with your craft knife. Keep both the stencil and the mask (the solid circle shape) as it might come in handy for another project
• To make the Moon Gazer Mask, print up the template below.

CLICK HERE TO DOWNLOAD PDF

 
• Cut around the template and then draw around the edge of the template onto a piece of heavy paper. Cut the shape out and coat front and back with a couple of coats of heavy gloss gel (allowing to dry in-between coats and before turning over). This will make your mask strong and durable and resistant to damage from paint and other liquids. I've used my mask in many projects like the paintings below,  and its still standing up well.

• Next take some heavy paper (I used old card stock) and insert inside your top between the front and the back, you don't want any paint to seep through onto the back of your top.

• Use your Lint Roller to remove any lint/fluff from your top

• Then place your moon gazer mask and your circle stencil on your top as shown, securing in place with some removable tape.

• Prepare your paint by mixing about 3 parts Pebeo Setacolor Opaque Silver Shimmer, with 1 part Pebeo Setacolor Thickener. I did this to make the paint thick to lesson the chance of the paint seeping under my mask/stencil

• Carefully paint inside you moon stencil. Paint in the direction starting outside the stencil moving inwards.

Add your blue paint

• Begin to randomly mix in Pebeo Setacolor in Cornflower. You can also leave a little black showing for extra colour variation.

• Use a thin Princeton brush to add curved silver lines to help give the impression of a sphere and also add texture.

• Remove moon stencil carefully, and trace around the edge of the moon gazer mask using a fine brush
  
  
  

• Touch up any edges with a fine brush

• I used a wider brush to paint in the hair, adding some silver and some blue paint.

Add blue to the hair

add the stars (optional)

Here I am using the SetaSkrib marker in Black to go over where my silver paint when wonky and neaten up my lines.

She's done. Don't forget to iron your top for 5 minutes as per instructions on the bottle to set the paint.

Cool Customised Calico Shopping Tote

Believe it or not this is my first "play" with Pebeo Setacolor Fabric Paints. This just goes to show how easy it is to create something cool and customised.  Here's how I did it...

• Grab a piece of calico or other firmly woven cotton fabric, wash it first to remove sizing (in detergent without fabric softener) and iron.
• I started with this stencil that I already had in my art supplies (sorry that it's old I can't tell you where I bought it or what it's called but you would be able to find something similar in your craft store).

I taped the stencil down with some removable masking tape to help keep it in place.

• Next I mixed Pebeo Setacolor Opaque in Black with Pebeo Setacolor Thickener. This is to make the paint a very thick consistency so it doesn't spread on the fabric when applied or seep under the stencil. I experimented with just adding a small amount of thickener at a time and stirring until I was happy with the consistency.
• Use a stencil brush (mine are from Princeton) to dab on the stencil. Try to keep the brush vertical and dab in an up and down manner rather than brush. This will help stop your stencil from moving and give you a cleaner finish.
• I did mine all in one colour to keep it simple, except for three small flowers within the design that I painted in Pebeo Setacolour Opaque in Cherry Red. You may need to use a smaller stencil brush or other fine brush to get details depending on your choice of stencil.

• To create the border I placed strips of Scotch tape about 1cm away from the straight edges of the stencil and painted inbetween, carefully removing tape and being careful not to move the stencil.

Ok, at this point I want to tell you are few things NOT TO DO, and how you might be able to fix it if you do do it...

• DO NOT accidentally drop your paint brush on your fabric: You can see a black dot at the top of the fabric where I did this. I decided to cut right around the edge of my border and appliqué the picture onto another piece of fabric.
• DO NOT smudge the edge when lifting the tape: I did little designs in the corners to try and mask this, then since I cut right around the edge this problem was also eliminated.
• Make sure your paint has dried evenly before you lift the stencil: I think this was caused because I ran out of black paint and had to mix another batch, the second patch was thicker than the first. It was easily fixed by using a Black Pebeo SetaSkrib marker to carefully go over the black painted area. This also allowed me to fix any small stencilling errors, and better define the design. 
• HOW A MISTAKE CAN SOMETIMES GIVE YOU A COOL UNEXPECTED DESIGN FEATURE: I purposely left some the lighter Black areas light, this gave my design a two-toned black effect which I really liked.
• I also added a little red SetaSkrib marker to the outside of my flowers for depth and added a few black dots with the Black marker.

One I got to this stage I began to see that I could actually turn my "play" into something useful.  

• I decided this could be a great design for a simple Calico shopping tote, so I cut a piece of calico to size (mine is 30cm X 45cm finished size but it doesn't need to be exact)
• I used an double-sided iron-on adhesive web, "Heat n Bond Ultrahold" but there are plenty of different types available. Follow the instruction for your particular product, but basically you peel of one side, iron it onto your design, cut around the shape of your design, then peel of the backing and iron it onto the other piece of fabric.
• I stitched on a piece of trim that I had in my sewing box to the bottom edge of the bag, this is optional, or you could use any trim that looked nice with the colours and design of your stencil

Once you have decided where to place the trim, pin it onto your fabric while it can still be laid out flat, and secure your trim BEFORE stitching up side seams

• To make simple straps cut two long strips of fabric (mine were 5cm wide and 65 cm long) Fold the fabric in half vertically and press. Leaving a seam of about .5cm stitch down the raw edges to make a tube. Use a Loop turning tool to turn your straps inside out and iron to press them flat.
• Next cut two strips of fabric the same width as your bag and about 5cm wide. This is to be a facing for the top of the bag so you can attach your straps. Finish the bottom edge your facing with a zig-zag stick, overlocker or other finishing method.

Stich in your straps before sewing up the side seams

•  Layer the top edge of your bag (right side up), place the strap its desired position (mine were about 6m from each edge), and the facing (wrong side up) and stitch through all layers. Repeat with both the front and back side of your bag) 
• Turn the facing to wrong side, edge stitch on top of the facing, at the edge of the seam, through the seam thickness.

Edge stitched will help the facing lay neat and flat

• Sew up your side seams, finish the edges, then turn your facing in and press.

And there you go, one variation of a simple tote bag that you can make with basic sewing skills and Pebeo Setacolour Fabric Paints.  The possibilities for what you can create are endless.